Navigation:
Most homeowners never think about the masonry or the masonry paint. It’s just kind of there all the time—why should we pay that much attention to it? We only have to care about masonry when it’s in need of repairs: when the cracks are getting more noticeable, and they’re becoming too annoying to ignore.
Most homeowners will immediately consider hiring a professional to repair these damages—and that’s the best way to approach the situation. But if you’re more comfortable doing it on your own, you should at least know the basics.
On this article, we will be focusing on how to repair masonry paint. This is mainly an aesthetic concern, but it still needs to be addressed properly.
First Things First: Repairing Cracks
Oftentimes, paint will be damaged by cracks on the wall. Repairing these cracks should be your number one priority because it threatens the structure (as well as appearance) of your masonry.
If you want to repair cracks in foundations, slabs, walkways, and walls, you’ll need to ensure that the cause of movement that cracked the masonry has been stabilized. If the movement is minimal, you may be able to seal it up by filling it with concrete caulk. It should move with the crack for a permanent seal.
For more severe movement, you need to reinforce the footer or foundation to stop it from causing further damage. If there are multiple cracks, it may indicate a structural problem that should be fixed before anything else. You may want to hire a professional for this.
For thinner cracks, masonry caulk could be used to fill them in. Clear the loose concrete by running a putty knife through the crack once or twice. You can also vacuum out all loose debris to make it easier to fill it up with sealant later on. Once you fill the crack with an overflowing bead of caulk, you should immediately smooth it over with a putty knife. Feather the edges into the surrounding surface.
Use a damp rag to wipe away any excess caulk. Leave it to set. Once it dries, you can paint over it.
Take note that it may take new masonry quite a while to cure and become completely hard. And depending on the kind of paint you are using it may take a longer time before you can apply it to new masonry.
Repairing Masonry Paint
You can paint over the repaired cracks with a roller and some paint. It’s really that simple. However, all masonry surfaces are difficult to paint, especially if you’re trying to get maximum coverage. A concrete surface is tough to paint because it is porous and will absorb every bit of moisture until it becomes completely saturated.
Expect that a full roller of paint won’t get you very far, and you will have to refill it a few times just to cover a few feet.
Of course, you can always hire a professional to do all of this for you. At Clean Sweep 317, we provide masonry repair, and other related services. Contact us today and we’ll see what we can do to help you.
The post How to Repair Masonry Paint appeared first on Clean Sweep 317.
source https://www.cleansweep317.com/repairing-masonry-paint/
No comments:
Post a Comment